Basic Info.
After-sales Service
Life-Time Maintenance Available
Output Type
AC Three Phase
Transport Package
Container
Specification
1000*1000*1300
Product Description
250kW Gas Generator
Main configuration and features:
- Highly efficient gas engine
- AC synchronous alternator
- Gas safety train and gas protection device against leakage
- Exhaust and jacket water heat exchanger
- Heating water and jacket water circulation system
- Expansion tank and water jacket heater
- Advanced engine control system, including: ignition system, detonation control system, speed control system, air/fuel ratio control system
- Strict shop test for all genset unit
- Industrial silencer reduces the noise by 12-20dB(A)
- Unattached switch cabinet and electric control cabinet
- Multi-functional control system with easy operation
- Data communication interfaces integrated into control system
- Lighting and smoke alarm system
- Monitoring battery voltage and charging automatically
- Auto refilling oil system
- Bus interface for connecting to higher level control unit
(Picture is only for reference)
| Structure and control cabinet |
| Structure Type | Special customized enclosure |
| Spraying Process | High quality powder coating |
| Electrical control cabinet | Integrated, IP54 |
| Noise level@10m, dB(A) | 65 |
- The technical data are based on a gas with a calorific value of 9.94kWh/Nm³. The technical data is based on standard conditions according to ISO8528/1,ISO3046/1 and BS5514/1
- The technical data is measured in standard conditions: Absolute atmospheric pressure: 100kPa;
Ambient temperature: 25°C; Relative air humidity: 30%- Rating adaptation at ambient conditions acc. to DIN ISO 3046/1. The tolerance for the specific fuel consumption is + 5 % at rated output
- Dimension and weight above are just for reference and may be subject to change. As this document is used only for
presale reference, take the specification supplied by JIGREN before ordering as final | CHP Unit performance data and manufacturing technology |
| CHP unit model | JIG200NS-T | Manufacturing technology- Special welded base frame, inner vibration isolators and design for whole lifting
- With high quality paint, endurable brightness as well resistance against abrasion and defacing
- Installation manual, operation and maintenance manual circuit diagram
Standards and certificate
l ISO3046,ISO8528,GB2820
l BS5000PT99,AS1359,IEC34- ISO9001:2008 quality system certification
|
| Electric output power(kW) | 200 |
| Electric efficiency | 37.3% |
| Overload runtime at 1.1xSe(hour) | 1 |
| Steady-state voltage deviation | ≤±1% |
| Transient-state voltage deviation | -15%~20% |
| Voltage recovery time(s) | ≤4 |
| Voltage unbalance | 1% |
| Steady-state frequency regulation | ±0.5% |
| Transient -state frequency regulation | ±5% |
| Frequency recovery time(s) | ≤3 |
| Steady-state frequency band | 0.5% |
| Recovery time response(s) | 0.5 |
| Telephone interference factor(TIF) | ≤50 |
| Telephone harmonious factor(THF) | ≤2%,as per BS4999 |
| Gas engine | AC alternator |
| Model | Steyr T12 | Model | ECO38-2LN4 |
| NO. of cylinders | 6 | Rated output power @400V (kW) | 240 |
| Cylinders arrangement | In line | Power factor | 0.8 |
| Bore x Stroke (mm) | 126x155 | Rated current @400V (A) | 433 |
| Displacement (L) | 11.596 | Excitation system | PMG |
| Cooling system | Water cooled | THF (BS EN60034- 1) | <2% |
| Rated speed (rpm) | 1500 | TIF (NEMA MG 1-22) | <50 |
| Rated output power (kW) | 287 | Winding material | 100% copper |
| Fuel input (kW) | 536 | Wiring connection | Star |
| Intake system | Turbocharged, intercooled | Rotor insulation class | H |
| Oil consumption(kg/h) | 0.24 | Winding pitch | 2/3 |
| Combustion type | Lean burn | A.V.R. model | R450 |
| Battery voltage | 24V | Voltage fluctuation(no load to full load) | ± 0.5% |
| Coolant type | Glycol mixture | Housing protection | IP23 |
| Gas consumption(m³/h)@ 100%load | 54 | Excitation method | Brushless |
| 75%load | 42 | Rated ambient temperature(ºC) | 40 |
| 50%load | 30 | Rated stator temperature rise(ºC) | 125 |
JIGREN-AJC233 Control system
Programmable control system is adopted with screen display, and various functions, including: engine protection and control, paralleling between gensets or gensets and grid, and CHP control functions, as well as communication functions, etc.
| Main functions |
- Engine monitor:coolant, lubrication, exhaust, battery - Modbus communication protocol based on RS232 and
- Supply gas circuit monitor:pressure, temperature and CH4 RS485 interfaces content - SMS message
- Auto paralleling and load share - Internet connection and USB 2.0 interface
- Voltage and PF control - 8-inch screen
- Alternator data:U, I, Hz, kW, kVA, kVAr, PF, kWh, kVAh - Internet monitor, auto orientation and cloud
- Grid data:U, I, Hz, kW, kVAr, PF communication
- 1000 history events log |
| Advantages |
- Accordant with consumer requirement - Simplified engine start/stop control
- Complete control solution - Enhanced stability and safety
- Convenient remote monitor and service
|
| Standard protection functions | Standard control functions |
Alternator protection- 2xReverse power
- 2xOverload
- 4xOvercurrent
- 1xOvervoltage
- 1xUndervoltage
- 1xOver/under frequency 1xUnbalanced current
| Power control- RPM control(synchronization)
- Power control(grid connection)
- Load share (Island)
| Voltage control- Voltage tracking (synchronization)
- Voltage control (Island)
- PF control (grid connection)
- Reactive power share (Island)
- |
Lubrication control- Auto refilling
- Warning and monitoring
| Pump control- Cooling system
- Emergency radiator
|
Busbar/mains protection- 1xOvervoltage
- 1xUndervoltage
- 1xOver/under frequency
- 1xPhase sequence
| Fan control- Ventilation for engine room
- Radiator fan
- Emergency radiator fan
| Valve control- Cooling system
- Heating system
- Emergency radiator
|
Engine protection- Various routine and customized protection functions
- Monitoring
| |
| Engine | Alternator | Canopy and base | Electrical cabinet |
| Gas engine | PMG | Steel monocoque base frame | Air circuit breaker |
| Ignition system | AC alternator | Engine bracket | Paralleling control system |
Lambda controller
Electronic governor actuator Electrical start motor
Battery system
Auto charging system | H class insulation IP23 protection
AVR voltage regulator PF control | Vibration isolators Alternator base Soundproof canopy | 8-inch screen Communication interfaces Electrical switch cabinet Lighting system
Smoke alarm system |
| Detonation control system |
| Coupling |
| Gas supply system | Lubrication system | Standard voltage | Induction/ exhaust system |
| Gas safety train | Oil filter | 400V/230V@50Hz | Air filter |
| Gas leakage protection | Daily auxiliary oil tank | Exhaust silencer |
| Air/fuel mixer | Auto refilling oil system | Exhaust bellows |
| Ventilation fan |
| Heat exchange system | Service and documents |
| Exhaust heat exchanger | Tools package | Engine operation and maintenance |
| Jacket water circulation pump | manual Installation and operation manual | Gas quality specification |
| Jacket water heat exchanger | Maintenance manual | Control system manual |
| Mixture circulation pump | Software manual | After service guide |
| Mixture radiator | Parts manual | Standard package |
| Expansion tank, Shut-off valve |
| Three-way auto proportional valve |
| Emergency radiator |
| Engine | Alternator | Lubrication system |
Jacket water heater
Cylinder temp. protection system | Space heater
Treatments against humidity and corrosion | New and used oil tank Automatic oil refilling device |
| Electrical system | Gas supply system | Voltage |
| RCD | Gas flow gauge | 380/220V |
Lightning protection
ATS control cabinet Thermal power gauge | Emergency relief flare Refrigerated gas drier Free water separator | 415/240V
440/220V |
| Electric power gauge | Gas compressor |
| Gas purification plant |
| Service and documents | Exhaust system | Exhaust gas using |
Service tools
Maintenance and service parts | Three-way catalytic converter | Exhaust gas evaporator LiBr refrigerator |
Address:
666, Fengxi Avenue, Wenjiang, Chengdu, Sichuan, China
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food, Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Industrial Equipment & Components, Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Transportation
Company Introduction:
Starlight Industry Co., Ltd. is a professional company focusing on design, development, production and sales of gas generators and atuotomotive educational equipment. Our company, together with our partners, have decades of experience in gas generator design, research and production.
Our gas generators cover fuel like natural gas, Bio-gas and LPG and power capacity covers from 5 kW to 1000 kW. Our gas generators are widely used in many industries, such as oil and gas, food processing, manufacturing plants, commercial buildings etc.
Now our gas generators are used by clients both in China and abroad. With our devotion and vision, our reliable and efficient gas generators will be selected by more and more clients at home and abroad.
){kind=link}